#KAOSS ETUNES PROFESSIONAL#

Activation of the dry contact, releases a 24V output power? this can be used to switch the relays of loudspeaker attenuators or other devices. The level of the chime can be adjusted at theīack of the amplifier. This dry contact mutes all background music inputs. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier. The emergency line / telephone input at the back has the highest priority. When needed, two APart paging microphones (MIC-PAT-D) can be wired in parallel on each microphone input. Its signal can be fed via the front jack or via the XLR3, DIN5 or Euroblock connector at the back. MIC input 1 is meant to be the main microphone paging input. The MA125 has 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input. The MA125 can drive 8 Ohm or constant voltage loudspeakers.

#KAOSS ETUNES PROFESSIONAL#

The MA125 is a very compact, professional PA mixing amplifier for commercial and industrial applications. Power supply: 24V DC (Euroblock)- 230V ACĭimensions (H x W x D): 88 x 272 x 286 mm S/N Ratio: -67dB (mic open), -77dB (all at zero) Limiter: Dynamic-slow -3 dB, defeatable via internal jumper. Priority system: 2-step priority mute system (VOX / contact closure) Speaker outputs: 8 Ohm, 70 - 100 Volt (Euroblock)Ĭhime: Yes (ding-dong) via contact closure (Euroblock) A 19” mounting bracket (Ref: MA35-19) is available as an option for rack mounting. The amplifier has been build into a compact and sturdy metal housing. MA65 can operate with a 24V and 230V power supply. The pre-amp out, power-amp input allows you to insert extra signal processors or to link the signal to other power amplifiers.įurther the MA65 is equipped with a bass - treble tone control, a record output and limiter circuit on the output to avoid clipping. The contact closure (via DIN5 on MIC1 or Euroblock on MIC1-2) will activate the chime and will mute input 3 (MIC3/LINE3) and 4. This VOX mute can be switched off via an internal jumper. The microphone inputs can have phantom power via an internal jumper.Ī two step priority system is standard: MIC1 can have voice activated priority (VOX) that mutes all other inputs. The amplifier has 4 inputs: 2 MIC, 1 MIC-LINE and 1LINE. that isn't helping, and sorry but it's not the way a premium brand should do business.The APart MA65 is probably the most complete and compact 65 watt 100 Volt mixing desktop amplifier. They did no field training, so if the customer reads the manual, they may know more than the dealer staff. I will say that Gibson could have done a much better job, actually should have done anything/something to help the dealers understand how the G Force unit works, to in turn show customers. I hope it continues to work well - getting to the pre-set open tunings is also very fast and accurate.

If it craps out, you can still manually tune the guitar. Once that was replaced, the unit went back to being fast and accurate in tuning up the guitar. Since then it has worked well, as intended. My dealer was great about filing the grooves in the brass nut down so I could play the guitar until the hardened Nickel nut arrived, then they installed it and made sure the nut was filed properly for the 10-46's. I have had the brass zero fret warranty replaced with the harder nickel one, Gibson FedEx'd it to me. I have a 2015 SG Special with the G Force, I did re-calibrate, per the instructions, when I changed from the 9's that it shipped with to 10-46's that I prefer to use. 'Building on eight years of continuous development, G FORCE extends the innovations introduced in Min-ETune by including new firmware that greatly improves ease of use.

The G Force is NOT just a re-named Min-ETune. Quote: 'My only experience with the current system (which I've read is just a renamed, no changes, e-tune) is at the store.' You read totally wrong info.

Kaoss etunes